Top 9 SparkFun I2C UK – Components & Replacement Parts

As an Amazon Associate I earn from qualifying purchases.

1. Sparkfun

#ad

Sparkfun I2S Audio Breakout, MAX98357A

#ad
Sparkfun #ad - Easily convert I2S auido to drive speakers with this breakout. Plenty of resources available to get you started. The gain of the amplifier can be configured from as low as +3dB to as high as +15dB. Can be configured to output to the left, right or both channels.
BrandSparkfun #ad
ManufacturerSparkfun #ad
Height1 cm (0.39 Inches)
Length9 cm (3.54 Inches)
Weight0 kg (0.01 Pounds)
Width4 cm (1.57 Inches)
Part Number2881

2. SparkFun

#ad

SparkFun Qwiic Adapter

#ad
SparkFun #ad - Turn any old i2c device into a Qwiic-enabled one with ease! Four clearly labelled pin holes to prevent any confusion. Use it to create a Qwiic device or breakout the connections using the available pin holes. The qwiic connect system makes creating a prototype system faster, more reliable and easier than ever! The qwiic range contains sensors, actuators, shields and much more in development that all make use of the I2C protocol.
BrandSparkFun #ad
ManufacturerSparkfun #ad
Height0 cm (0 Inches)
Length0 cm (0 Inches)
Weight0.01
Width0 cm (0 Inches)
Part Number2365

3. Sparkfun Electronics

#ad

Sparkfun Electronics QwiicBus, EndPoint

#ad
Sparkfun Electronics #ad - The qwiicbus endpoint is a great solution to extend distance and reduce noise susceptibility. He breakout uses nxp’s pca9615 ic, which converts the two default I2C signals into four differential signals, two for SCL and two for SDA.

This qwiicbus endpoint is the fastest and easiest way to extend the range of your I2C communication bus. To make it even easier to get your readings, all communication is enacted exclusively via I2C, utilizing the handy Qwiic system so no soldering is required to connect it to the rest of your system. This updated version of the differential i2c breakout adds two 01" spaced pins connected to the unused pair of wires on the RJ-45 connectors so users can easily take advantage of the unused pair for whatever they would like.
BrandSparkfun Electronics #ad
ManufacturerSparkfun Electronics #ad
Height1.8 cm (0.71 Inches)
Length5 cm (1.97 Inches)
Weight0
Width2.5 cm (0.98 Inches)
Part Number4028

4. SparkFun

#ad

SparkFun SEN-14352 Qwiic Shield for Arduino/uk

#ad
SparkFun #ad - The qwiic shield has four Qwiic connection ports, all on the same I2C bus. As long as your devices are on different addresses, the Qwiic system allows for daisy chaining. The qwiic shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your Arduino-based device. You can stack as many sensors as you'd like to create. This shield connects the I2C bus on your Arduino to a series of SparkFun Qwiic connectors.
BrandSparkFun #ad
ManufacturerSparkfun #ad
Weight0.04
Part Number2310

5. SparkFun

#ad

SparkFun Qwiic Cable, 500mm

#ad
SparkFun #ad - Connect all of your qwiic Connect devices no matter how far apart! Each of the wires is colour coded. The qwiic connect system makes creating a prototype system faster, actuators, more reliable and easier than ever! The qwiic range contains sensors, shields and much more in development that all make use of the I2C protocol. Made from 28awg wire with a length of 500mm.
BrandSparkFun #ad
ManufacturerSparkfun #ad
Height0 cm (0 Inches)
Length0 cm (0 Inches)
Weight0.01
Width0 cm (0 Inches)
Part Number2299

6. SparkFun

#ad

SparkFun Qwiic Cable, Breadboard Jumper 4-pin

#ad
SparkFun #ad - Add breakout functionality to any Qwiic connect product. The qwiic connect system makes creating a prototype system faster, actuators, more reliable and easier than ever! The qwiic range contains sensors, shields and much more in development that all make use of the I2C protocol. Made from 28awg wire with a length of 150mm. The adapter has colour coded wires to easily identify each pin.
BrandSparkFun #ad
ManufacturerSparkfun #ad
Height1 cm (0.39 Inches)
Length2 cm (0.79 Inches)
Weight0.01
Width5 cm (1.97 Inches)
Part Number2295

7. SparkFun

#ad

Digital Temperature Sensor Breakout, TMP102

#ad
SparkFun #ad - Accuracy: 05°c -25°c to +85°C. 1. 4v to 3. 6vdc supply range. Low quiescent current 10µA Active max 1µA Shutdown max. Two-wire serial interface. 12-bit, 00625°c resolution.
BrandSparkFun #ad
ManufacturerSparkFun #ad
Height0.3 cm (0.12 Inches)
Length8 cm (3.15 Inches)
Weight0.01
Width5 cm (1.97 Inches)
Part NumberSEN-13314
ModelTMP-102

8. SparkFun

#ad

TRIAD SPECTROSCOPY SENSORAS7265X

#ad
SparkFun #ad - The sparkfun triad spectroscopy Sensor communicates over I2C by default or over 115200bps serial. Integrated 405nm uv, 5700k white, and 875nm IR LEDs. Detect the light from 410nm UV to 940nm IR. Utilising the handy qwiic system, no soldering is required to connect it to the rest of your system. 18 frequencies of light sensing from 410nm to 940nm.
BrandSparkFun #ad
ManufacturerSparkfun #ad
Height2.54 cm (1 Inches)
Length5.08 cm (2 Inches)
Weight0 kg (0 Pounds)
Width5.08 cm (2 Inches)
Part NumberSEN-15050
ModelSEN-15050

9. SparkFun

#ad

SparkFun Qwiic Shim for Raspberry PiNot Included-Small Form Factor & Foot Print Friction-Based Connector No Soldering Easily Removable 3.3V Regulator HAT Stackable Quick Prototype w/ I2C

#ad
SparkFun #ad - This reduces the amount of required PCB space, actuators, shields and cables that make prototyping faster and less prone to error. All qwiic-enabled boards use a common 1mm pitch, and polarized connections mean you can’t hook it up wrong.

It has a small form factor for minimal space requirements and fits inside protective cases. Note: raspberry Pi not included. The sparkfun qwiic connect system is an ecosystem of i2c sensors, 4-pin jst connector. The design allows you to plug directly to the pi's i2c bus with no soldering required and the thin PCB design allows for it to be sandwiched on your Pi GPIO with other HATs! Uses a unique friction-based connector that wedges itself onto the GPIO header for a secure, solderless connection.

Also has a 3. 3v regulator so it will work with all Qwiic devices. The sparkfun qwiic shim compatible with Raspberry Pi is a small, easily removable breakout that easily adds a Qwiic connector to your Raspberry Pi.
BrandSparkFun #ad
ManufacturerSparkFun Electronics #ad
Height0.5 cm (0.2 Inches)
Length1.1 cm (0.43 Inches)
Width1.6 cm (0.63 Inches)
Part NumberSEN-15177